2CD2022WD-I

2CD2022WD-I

$191.00

Hikvision DS-2CD2022WD-I 2MP Outdoor Mini Bullet Camera

Replacement product:

  • 0.028 lux @ (f/2.0, AGC on), 0 lux with IR
  • 1920 x 1080
  • 4 mm @ f/2.0 (6 mm optional) Angle of view: 85°(4 mm), 52°(6 mm)
  • H.264/MJPEG/H.264+
  • 30 fps (1920 x 1080, 1280 x 960, 1280 x 720)
  • 10 meters
  • 12 VDC ± 10%, PoE (802.3af)
Compare

Description

Replacement product:

Hikvision DS-2CD2022WD-I

The 2MP Outdoor Mini Bullet Camera from Hikvision features a 1/3″ progressive-scan CMOS sensor for up to 1920 x 1080 resolution at 30 fps. Equipped with a 4mm fixed lens, the camera can capture an 85° horizontal field of view for a wide coverage area. Additionally, the camera’s lens is surrounded by IR LEDs, providing up to 98′ of night vision in complete darkness. Image enhancements such as WDR, backlight compensation, and 3D DNR allow you to capture clear images in ambient light for use in a variety of environments. You can easily pan, tilt, and rotate the camera during installation so that you can choose a specific area you would like to view, and PoE technology allows you to run just one wire for both data and power, for a simple and easy setup. This device is ONVIF-compliant for compatibility with a wide range of surveillance devices, and it is IP66-rated for weatherproof protection.

  • 1/3″ progressive-scan CMOS sensor for up to 1920 x 1080 video resolution
  • Dual video streaming for maximizing bandwidth usage
  • 4mm fixed focal lens provides an 85° horizontal field of view
  • The wide dynamic range allows you to capture clear images in ambient lighting
  • 3D DNR effectively filters the noise from the image, even in low-light scenarios
  • Backlight Compensation and saturation, brightness, contrast, and sharpness image settings
  • IR LEDs provide up to 98.4′ of night vision for use at all times
  • 3-axis adjustment for choosing your desired view area during installation
  • Saturation, brightness, contrast, and sharpness image settings
  • Motion detection, tampering alarm, network disconnect, and storage exception alarm triggers
  • Security measures including one-key rest, flash-prevention, and password protection
  • ONVIF-compliant for compatibility with a wide range of surveillance devices
  • IP66 weatherproof housing protects the camera from inclement weather for use outdoors
  • Metal housing and mounting bracket for strength and durability
  • Mobile Monitoring via EZVIZ P2P or iVMS-4500
  • Can be powered via 12 VDC or standard PoE for convenience

Additional information

Weight1 lbs
Dimensions7 × 4 × 4 in

SPECIFICATIONS

Camera
Image Sensor1/3″ progressive-scan CMOS
Minimum Illumination0.01 lux @ f/1.2 (AGC On)
0 lux with IR
Shutter Time1/3 to 1/10,000 seconds
Lens4mm @ f/2.0
Angle of View85°
Lens MountM12
Day & NightIR cut filter with auto switch
IR RangeUp to 98′ (30 m)
Digital Noise Reduction3D DNR
Wide Dynamic Range120 dB
Compression
Video CompressionH.264 Main Profile / MJPEG
Bit Rate32 Kbps to 16 Mbps
Dual StreamingSupported
Image
Maximum Image Resolution1920 x 1080
Frame Rate50 Hz: 25 fps (1920 x 1080), 25 fps (1280 x 960), 25 fps (1280 x 720)
60 Hz: 30 fps (1920 x 1080), 30 fps (1280 x 960), 30 fps (1280 x 720)
Image SettingsRotate mode, Saturation, Brightness, Contrast, Sharpness adjustable through client software or web browser
Back Light CompensationYes, zone configurable
ROISupported
Network
Network StorageNAS (support NFS, SMB/CIFS), ANR
Alarm TriggerMotion detection, Tampering alarm, Network disconnect, IP address conflict, Storage exception
ProtocolsTCP/IP, UDP, ICMP, HTTP, HTTPS, FTP, DHCP, DNS, DDNS, RTP, RTSP, RTCP, PPPoE, NTP, UPnP, SMTP, SNMP, IGMP, 802.1X, QoS, IPv6, Bonjour
SecurityOne-key reset, Flash-prevention, Dual stream, Heartbeat, Mirror, Password protection, Privacy mask, Watermark, IP address filtering, Anonymous access
InteroperabilityONVIF (Profile S, Profile G), PSIA, CGI, ISAPI
Interface
Communication1 x RJ45 10/100M Ethernet interface
General
Operating Conditions-22 to 140°F (-30 to 60°C)
Humidity95% or less (non-condensing)
Power Supply12 VDC ±10%, PoE (802.3af)
Power ConsumptionMaximum: 5 W
Ingress protectionIP66 weatherproof rating

Reviews

There are no reviews yet.

Be the first to review “2CD2022WD-I”